Turbomix 70 Cement Plaster Machine

Turbomix 70, preferred by professional contractors and corporate companies, is a traditional rough plaster machine preferred in both domestic and international markets. It is preferred due to its extensive service network and the use of economical and durable spare parts produced by an experienced technical team. With its improved chassis, rotor-stator removal tool, optional GPS tracking system against theft, optional pressure washer for cleaning, optional remote control system, optional card-operated function, large tool box, dust- and water-protected installation, and advanced automation system, it provides ease of use on construction sites and can be used for many years with minimal service requirements. Turbomix 70 is a high-performance traditional rough plaster machine that continuously and fully automatically mixes, pumps, and sprays all types of ready-mixed dry materials based on sand, cement, lime, insulation, or gypsum homogeneously for plastering applications.

• Pumping Capacity: 70 l/min
• Pumping Capacity (With Different Pump): 140 l/min
• Stator Rotor Set: 2L6, 2L6 Plus, 2L6 Plus with Clamp
• Pumping Pressure: 25 bar
• Pumping Distance (Horizontal): 100 m (Max)
• Pumping Height: 40 m (Max)
• Power Supply: 400 V, 50 Hz
• Pump Motor: 7.50 kW
• Mixer Motor: 3.00 kW
• Electrical Cable: 5*4 mm² TTR, 25 m
• Protection Fuse: 3*40 A
• Compressor: 2.20 kW, 400 l/min, 8 bar
• Hopper Capacity: 180 l
• Length: 2700 mm
• Width: 1400 mm
• Height: 1650 mm
• Loading Height: 1650 mm
• Weight: 850 kg

• Stator Rotor Set: 2L6
• Mortar Hose: 40 bar, Ø 50 mm, 20 m, with coupling
• Mortar Hose: 40 bar, Ø 50 mm, 10 m, with coupling
• Mortar Hose: 40 bar, Ø 35 mm, 10 m, with swivel head coupling
• Mortar Hose Reduction: 50/35 mm
• Mortar Hose Seal: Ø 50 mm, 2 pcs
• Mortar Hose Seal: Ø 35 mm, 2 pcs
• Pressure Gauge: 60 bar
• Vibrating Screen: 6 mm
• Air Hose: Ø 10 mm, 20 m, with Geka coupling
• Air Hose: Ø 10 mm, 11 m, with Geka coupling
• Air Hose: Ø 10 mm, 10 m, with Geka coupling
• Air Hose Seal: 10 mm, 2 pcs
• Spray Gun: Ø 35 mm, 18 mm nozzle
• Spray Gun Nozzle: 18 mm, 1 pc
• Electrical Cable: 5*4 mm² TTR, 25 m
• Cleaning Ball: Ø 50 mm, 3 pcs
• Compressor: 2.20 kW, 400 l/min
• Control Panel
• Connection Coupling
• Cleaning Rod
• Manual Rotor Removal Tool
• Vehicle Towing Unit
• GPS (optional)

It is suitable for use with the following types of factory-produced, dry pre-mixed, pumpable mortars:

• Injection Mortars
• Reinforcement and Adhesive Mortars
• Self-Leveling Screeds
• Cement Mortars
• Lime Mortars
• Lime – Cement Mortars
• Fango Materials
• Insulation Plasters
• Embedding Mortars
• External Rough Plaster
• Wall Mortar
• Premix Mortar (Pre-Mixed Bag)
• Insulation Materials
• Colored Plasters
• Bonding Plasters
• Floor Covering – Spray Mortars
• Filling and Bonding Mortars
• Fiber Mortars
• Suspension Mortars
• Glass Fiber Reinforced Mortars