
#0001016CategoryAccessory Attaching MachinesProduct TypeHand Lever PressBrandKanmakModelKM800Listing TypeFor SaleConditionNewLocationİstanbulFatihDeliveryIn Stock
Tulumba Hand Press KM800
The Tulumba Hand Press KM800 fastens snap buttons, eyelets, rivets, studs and jeans buttons with suitable molds. It also works for button covering and punching jobs. The operator controls the pressure with lever movement. The manual mechanism does not require an electrical connection.
Technical Specifications
Mold and Application Selection
First, determine the accessory type and material thickness. Then select the appropriate lower and upper mold. Before moving to series application, test on a sample. You can compare manual, electric and motorized snap button machines for different production needs. You can examine other accessory fastening machines and our other products. We share our application videos on our YouTube channel.
Sample Preparation with the Tulumba Hand Press
First, determine the accessory you will apply, such as a snap button, rivet or eyelet. Check the dimensions of the upper and lower parts for each accessory. Then select the appropriate molds carrying these parts. Since accessories sold under the same name may have different dimensions, check on a sample.
For example, when working with jeans buttons, prepare a sample with the same number of fabric layers you will use in production. Then make the first fastening on the sample. This way, you check how the accessory sits on the fabric and whether it aligns with the point you marked. Also, review the mold selection again when the product size changes.
Manual Operation and Mold Change
The press works with lever movement. Therefore, during short jobs and sample preparation, the operator controls each pressing separately. In addition, since it does not require an electrical connection, you can perform manual application on a suitable workbench. When switching to a punching or button covering job, check the mold requirements of the new job.
Then test the first piece on a sample again. Especially when the material thickness changes, compare how the same accessory sits on the surface. This step helps you see how the accessory and mold work together before starting series work.
Kanmak Makina
Hacı Kadın, Hacı Kadın Cd. No:2, 34134 Fatih/İstanbul, Fatih, İstanbul, Turkiye





