Wood Finishing Machine Prices and Models

1 products found.

Wood Surface Treatment Machines: Spray Booths, Spraying Robots and Drying Lines

The Wood Surface Treatment Machines category covers machines and lines that apply primer, paint, lacquer and oil to furniture, doors, flooring and wood panels and dry these coats. It is the finishing stage that defines the look and durability of the product and is used by furniture factories, door makers and finishing shops. On makinateklif.com you can compare new and used wood finishing listings by system type, brand and location.

Types of Wood Surface Treatment Machines and What Each Is For

  • Spray booths: Water curtain or dry filter booths give a clean, safe area for manual spraying.

  • Automatic spraying machines and robots: Coat panels and parts on a conveyor with an even film thickness.

  • Roller coaters: Apply primer, lacquer and UV coatings economically to flat panels.

  • Vacuum coaters: Coat profiles, skirting and mouldings on all four sides in one pass.

  • UV and hot air drying lines: Dry coated parts quickly to raise line speed.

What Determines Wood Finishing Machine Prices?

  • Application method: Manual booth, automatic spraying, roller or vacuum system.

  • Line length and capacity: Parts or square metres coated per hour.

  • Drying technology: UV lamps, hot air or infrared drying.

  • Overspray recovery and filtration: Saves coating and improves environmental compliance.

  • Controls and automation: Part recognition, programmed gun movement and colour change speed.

What to Check When Buying a Used Wood Finishing Machine

New and used machines from manufacturers such as Cefla, Venjakob, Makor and Giardina are widely traded. When assessing a used machine, it is worth checking the following:

  • Guns, pumps and coating lines are clean and leak-free

  • Wear on conveyors, belts and roller surfaces

  • UV lamp hours and even temperature in the drying tunnel

  • Adequate filtration, extraction and ventilation

  • Even film thickness and a flawless surface on a test part

Factories coating panels and doors in volume choose automatic lines with UV drying, while small workshops often buy spray booths and roller coaters used.