
#0000879CategoryIndustrial BrushesProduct TypeCylinder BrushBrandBabataşListing TypeFor SaleConditionNewLocationİstanbulEyüpsultanDeliveryIn Stock
Chiller heat exchanger cleaning brushes (condenser and evaporator tube cleaning brushes) are mechanical cleaning tools designed to maintain the internal surfaces of shell-and-tube heat exchangers installed in water-cooled chiller systems.
As water continuously circulates through chiller systems, deposits such as limescale, hard scale, sludge, corrosion, and biological algae can gradually build up on the inner surfaces of the tubes. Even thin layers of limescale can reduce heat transfer efficiency, potentially causing the chiller compressor to consume more energy.
Chiller heat exchanger brushes help mechanically remove these deposits from the internal tube surfaces. When the appropriate brush material and diameter are selected, they contribute to maintaining heat transfer performance and efficient system operation.
Detailed Size Standards for Chiller Heat Exchanger Cleaning Brushes
The brush size for chiller maintenance is determined by the actual internal diameter (ID) of the tube, not its external or nominal diameter. To remove deposits effectively, the brush diameter must be selected according to the tube's internal diameter and the type of buildup. An excessively tight fit may damage the tube surface, so the final brush size should be selected in accordance with the recommendations of the heat exchanger and cleaning equipment manufacturers.
Chiller Tube Diameter and Brush Size Matching Chart:
Effective Brushing (Bristle) Length: Since heat exchanger tubes can be quite long, the brush must move smoothly through the tube with the flexible shaft. Standard bristle lengths generally range from 75-115 mm (3″-4.5″).
Flexible Shaft Connection Standards (Thread Types): Stainless steel or brass connection options may be available for use with the water-fed flexible shafts of chiller tube cleaning machines (e.g. Goodway).
Bristle Material and Chiller Tube Metal Compatibility Matrix
The metal used in chiller heat exchanger tubes (typically copper, copper-nickel alloy, titanium, or stainless steel) and the hardness of the deposits determine the appropriate brush bristle material. Using a wire that is too hard or incompatible with the tube material may cause scratches or surface damage.
Babataş Harbi Fırça Sanayi
Sakarya Mahallesi Karakol Üstü Sokak No: 13 -15/B, Eyüpsultan, İstanbul, Turkiye