Chiller Tube Cleaning Brushes

Listing No#0000878CategoryIndustrial BrushesProduct TypeCylinder BrushBrandBabataşListing TypeFor SaleConditionNewLocationİstanbulEyüpsultanDeliveryIn Stock
Ask for PriceThe seller shares the price on request
Yalçın BabataşMember since 2026
Consultant
Yalçın Babataş

Advertisement
Ad Space

Chiller tube cleaning brushes (condenser and evaporator heat exchanger tube brushes) are specialized industrial brushes designed to mechanically remove limescale, hard scale, sludge, corrosion, and biological algae deposits that accumulate over time inside the heat transfer tubes of water-cooled chiller systems.

Even thin layers of dirt and deposits on the inner surfaces of chiller tubes can reduce heat transfer efficiency and cause the compressor to work harder. These brushes are used during routine maintenance to help control chiller energy consumption, maintain balanced Delta T values (the temperature difference between inlet and outlet), and improve compressor operating conditions.

Detailed Size Standards for Chiller Tube Cleaning Brushes

Brush selection for chiller maintenance is based on the actual internal diameter (ID) of the tube, not its nominal external diameter.

To ensure effective contact with the inner tube surface and remove accumulated deposits, the brush diameter must be selected according to the tube's internal diameter and the type of buildup. An excessively tight fit may damage the tube surface, so the correct diameter should be determined in accordance with the heat exchanger and cleaning equipment manufacturer's recommendations.

Chiller Tube Internal Diameter (Ø) and Brush Size Guide:

  • 1/4″ Shaft Group (Micro): Tube internal diameter 6.4-9.5 mm → Brush diameter Ø 7-10.5 mm
  • Standard Chiller Group:
    • Tube internal diameter 12.7 mm (1/2″) → Brush diameter Ø 13.5-14 mm
    • Tube internal diameter 15.9 mm (5/8″) → Brush diameter Ø 16.5-17.5 mm
    • Tube internal diameter 19.0 mm (3/4″) → Brush diameter Ø 20-21 mm
    • Tube internal diameter 22.2 mm (7/8″) → Brush diameter Ø 23.5-24 mm
  • Large Industrial Chillers / Absorption Chiller Units: Tube internal diameter 25.4 mm (1″) and above → Brush diameter Ø 26.5-40 mm

Effective Brushing (Bristle Arrangement) Length: To allow the brush to move through the tube without jamming and operate effectively with a flexible shaft, the standard bristle length generally ranges from 75-115 mm (3″-4.5″).

Flexible Shaft Connection Standards (Thread Types): The rear of the brushes can feature stainless steel or brass connection options for attachment to the flexible shafts of chiller cleaning machines (e.g. Goodway).

  • 8-32 UNC: A fine-thread connection standard used for small-diameter tubes and narrow shaft systems.
  • 1/4″-28 UNF: A commonly used fine-thread connection option in commercial chiller cleaning equipment. Compatibility should be verified according to the machine and shaft model.
  • Quick-Connect: Plug-in connection systems that provide convenient attachment through a pin or socket mechanism without requiring threaded assembly.

Chiller Brush Types by Bristle Material and Tube Compatibility

The metal used in chiller tubes (typically copper, copper-nickel alloy, titanium, or stainless steel) and the hardness of the deposits inside the tubes determine the appropriate brush bristle material.

Similar Products