
#0000876CategoryIndustrial BrushesProduct TypeCylinder BrushBrandBabataşListing TypeFor SaleConditionNewLocationİstanbulEyüpsultanDeliveryIn Stock
Internal tube deburring brushes (industrial cylindrical deburring brushes) are mechanical surface-finishing tools designed to remove metal burrs and residues from tube inner walls and intersecting hole edges after CNC machining, laser cutting, sawing, or tapping operations.
1. Technical Dimensions and Geometric Parameters of Internal Tube Deburring Brushes
For internal tube deburring operations, brush geometry is determined according to the tube's nominal dimensions, material properties, and the required level of burr removal.
Brush Outer Diameter (D₁): Depending on the tube's internal diameter and the application, brushes can be manufactured in sizes ranging from Ø 3 mm to Ø 300 mm. The brush diameter can be designed larger than the tube's internal diameter to reach the edges of intersecting radial holes. The required diameter difference should be determined according to bristle material, flexibility, tube geometry, and burr type.
Bristle (Filament) Diameter (d): Selected according to burr thickness and tube material. Wire diameters of 0.10-0.20 mm can be used for delicate aluminum burrs, while 0.25-0.50 mm wires are suitable for harder steel, stainless steel weld seams, and casting burrs.
Active Brushing (Bristle) Length (L₁): Generally designed in lengths ranging from 40-150 mm, depending on the deburring depth and tube geometry.
Overall Body Length (L₂): Depending on integration requirements for robotic arms, CNC turrets, or pneumatic systems, brushes can be manufactured with an overall length of 90-1000 mm, either as a one-piece body or with an extended shaft.
Shaft and Shank Type: For operation at high speeds with suitable runout and balance values, brushes can be manufactured with smooth cylindrical shafts, hex shanks compatible with collet systems, or threaded adapters such as M6 and M12. The shaft type should match the machine and connection system being used.
2. Hardened Metallic Wire Brushes (Carbon Steel / Stainless Steel / Brass)
Carbon Steel Wire: Used for mechanically removing burrs caused by cutting, welding, and drilling operations in heavy-duty steel tubes. Wire grade and thickness are selected according to burr hardness and the surface being cleaned.
Stainless Steel Wire (AISI 302 / 304 / 316): Suitable for stainless steel and titanium tube applications. The correct wire grade and clean manufacturing conditions help reduce the risk of transferring free iron particles to the surface. For contamination-sensitive applications, the brush material grade and usage history should also be considered.
Brass and Phosphor Bronze Wire: Used for deburring the inner surfaces of aluminum, copper, and brass tubes with lower abrasiveness. Selecting the appropriate wire diameter and brushing pressure can help reduce the risk of scratching and material loss. These materials generally produce fewer sparks than steel wire; however, application-specific spark safety requirements should be assessed separately.
3. Advanced Manufacturing Technology and Operational Details
Double Spiral - Heavy Duty Winding: For models designed to withstand high mechanical loads, the supporting wire core can be manufactured with a double-spiral or four-wire twisted construction. An appropriate winding geometry and connection design help reduce the risk of bristles loosening or shedding during operation. Clockwise (CW) and counterclockwise (CCW) operation must be specified according to the brush design.
Dense Fill Control: Bristle density per centimeter is adjusted according to the burr type and chip evacuation requirements. Dense winding can be preferred for fine burr removal. For applications involving casting chips and larger residues, wider-pitch spiral designs can help facilitate chip removal.
CNC and Robotic Automation Integration: In addition to handheld drills, brushes can be manufactured with dimensions and connections suitable for industrial robotic arms and CNC machining centers. For integration with automatic tool changing (ATC) systems, shaft dimensions, connection tolerances, and balance values must be specified according to the machine manufacturer's requirements.
Main Applications
Internal tube deburring
Cleaning intersecting hole edges
Rounding profile edges
Cleaning internal passages in hydraulic blocks
Removing weld burrs from seam-welded tubes
Babataş Harbi Fırça Sanayi
Sakarya Mahallesi Karakol Üstü Sokak No: 13 -15/B, Eyüpsultan, İstanbul, Turkiye